Holmatro

This electrically powered pump is compact and lightweight, allowing work to be carried out in hard-to-reach places. Accessories such as support frames or protective frames and protective plates are available for this pump.max. operating pressure: 500 / 50 (bar/Mpa)for cutter type: MobileCapacityOil tank capacity (effective): 6000 ccNumber of stages: 21st stage output / min.: 3200 cc2nd stage output / min.: 1200 cc1st stage pressure range: 0 - 100 / 0 - 10 (bar/Mpa)2nd stage pressure range: 100 - 500 / 10 - 50 (bar/Mpa)General dataOperating type: Electric motorMotor: 230 VAC - 1.5 kW - 50 Hz - 1 PhDimensions, weight and temperatureWeight, ready for use: 47 kgDimensions (LxWxH): 462 x 339 x 470 mm

This electrically powered pump is compact and lightweight, enabling work to be carried out in hard-to-reach places.max. operating pressure: 500 / 50 (bar/Mpa)for cutter type: MobilePower outputOil tank capacity (effective): 2000 ccNumber of stages: 21st stage power / min.: 2200 cc2nd stage output / min.: 700 cc1st stage pressure range: 0 - 200 / 0 - 20 (bar/Mpa)2nd stage pressure range: 200 - 500 / 20 - 50 (bar/Mpa)General dataOperating type: Electric motorMotor: 230 VAC - 0.75 kW - 50 Hz - 1 PhDimensions, weight and temperatureWeight, ready for use: 27.5 kgDimensions (LxWxH): 405 x 325 x 375 mm

This electrically powered pump is compact and lightweight and enables work to be carried out in places that are difficult to access.Accessories such as carrying frames or protective frames and protective plates are available for this pump.max. operating pressure: 350 / 35 (bar/Mpa)for cutter type: stationary HSC200STG40CapacityOil tank capacity (effective): 25000 ccNumber of stages: 11st stage output / min: 3200 cc1st stage pressure range: 0 - 350 / 0 - 35 (bar/Mpa)General dataOperating type: Electric motorMotor: 400 VAC - 2.2 kW - 50 Hz - 3 PhDimensions, weight and temperatureWeight, ready for use: 72 kgDimensions (LxWxH): 528 x 400 x 651 mm

The IPU-S 32S25E - your pump unit for heavy-duty use.Applications such as the recycling of refrigerators require a cutting system that is equipped for intensive use in a heavy-duty environment. We have developed a customised pump that is perfectly suited to this application:Oil level, oil filter and temperature sensor; to reduce wear and tear on the pump modulesAlarm function for oil level, oil filter and temperature sensorsLowered pump module, which is located in the pump's oil, also to further reduce wearThe pump switches off automatically if it is not used for more than 15 minutesControl box with robust sheet metal transformerLess vibrationMax. operating pressure: 350 / 35 (bar/Mpa)for cutter type: stationary HSC200STH40Cutting capacityOil tank capacity (effective): 25000 ccNumber of stages: 11st stage output / min: 3200 cc1st stage pressure range: 0 - 350 / 0 - 35 (bar/Mpa)General dataOperating type: Electric motorMotor: 400 VAC - 2.2 kW - 50 Hz - 3 PhSpeed: 2850 rpmDimensions, weight and temperatureWeight, ready for use: 120 kgDimensions (AxWxC): 523 x 640 x 650 mm

Holmatro electric cable cutters are suitable for cutting underground cables and telephone cables.

Holmatro electric cable cutters are suitable for cutting underground cables and telephone cables.

Guillotine cable cutters from Holmatro are suitable for cutting large cables with a maximum diameter of 210 mm. With its low weight and the option of fitting carrying handles, it is possible to manipulate the tool in any position.

The HBC050A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in the recycling sector or in production. When developing a cordless, battery-powered cutter, the challenge is to combine the actual device with a battery and a pump without neglecting the requirements for tough, heavy-duty tasks. Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance.SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 120 mmMax. cutting diameter of power cable: Ø 90 mmNumber of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 441 kNDimensions: 815x266x278 mmWeight incl. battery: 15.8 kgVoltage: 28 Volt VDCScope of delivery1x 101.003.081 - HBC050A10 - Cordless cable shears2x 101.003.240 - PBPA288 - rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HBC050A30 cutter is suitable for a wide range of industrial cutting applications, e.g. vehicle recycling or dismantling, demolition work and metal/scrap recycling.When developing a cordless, battery-powered cutter, the challenge is to combine the actual tool with a battery and a pump without neglecting the requirements for tough, heavy-duty tasks.Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance. SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 170 mmMax. cutting diameter round material (S235 acc. to EN 10025-2): 22 mmmax. cutting diameter pipe (E235 acc. to EN 10305-1), wall thickness 3 mm: 60 mmCatalysts: 90 %Number of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 438 kNDimensions: 814x266x278 mmWeight incl. battery: 15.3 kgVoltage: 28 Volt VDCScope of delivery1x 101.003.237 - HBC050A30 - Battery-powered recycling shears2x 101.003.240 - PBPA288 - Rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HBC100A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in recycling or production applications. The challenge in developing a cordless, battery-powered cutter is to combine the actual tool with a battery and a pump, without neglecting the requirements for tough, heavy-duty tasks. Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance. SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 145mmMax. cutting diameter of power cable: Ø 90 mmNumber of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 559 kNDimensions: 859x271x276 mmWeight incl. battery: 19.8 kgVoltage: 28 Volt DCScope of delivery1x 101.003.235 - HBC100A10 - Cordless cable shears2x 101.003.240 - PBPA288 - rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HBC100A30 cutter is suitable for a wide range of industrial cutting applications, such as vehicle recycling or dismantling, demolition and metal/scrap recycling. The challenge in developing a cordless, battery-powered cutter is to combine the actual tool with a battery and a pump without compromising the requirements for tough, heavy-duty tasks. Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance. SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 170 mmMax. cutting diameter round material (S235 acc. to EN 10025-2): 26 mmMax. cutting diameter of pipe (E235 acc. to EN 10305-1), wall thickness 3 mm: 80 mmCatalysts: 95 %Number of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 438 kNDimensions: 832x271x276 mmWeight incl. battery: 18.8 kgVoltage: 28 Volt VDCScope of delivery1x 101.003.238 - HBC100A30 - Battery-powered recycling shears2x 101.003.240 - PBPA288 - rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HBC400A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in recycling or production applications. The challenge in developing a cordless, battery-powered cutter is to combine the actual tool with a battery and a pump, without neglecting the requirements for tough, heavy-duty tasks. Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance. SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 170mmMax. cutting diameter of power cable: Ø 140 mmNumber of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 977 kNDimensions: 955x271x276 mmWeight incl. battery: 24.7 kgVoltage: 28 Volt DCScope of delivery1x 101.003.236 - HBC400A10 - Cordless cable shears2x 101.003.240 - PBPA288 - rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HBC400A30 cutter is suitable for a wide range of industrial cutting applications, such as vehicle recycling or dismantling, demolition and metal/scrap recycling. The challenge in developing a cordless, battery-powered cutter is to combine the actual tool with a battery and a pump without compromising the requirements for tough, heavy-duty tasks. Our next-generation battery-powered cutters for industrial applications utilise proven and patented Holmatro pump technology combined with a purpose-built battery for enhanced performance. SAFE Controlled cutting with minimised vibration and noise to eliminate the risk of sparking. The tools can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance. Protected moving parts to further minimise the risk of accidents. No hoses, so no tripping hazards.DURABLEThe patented and infinitely variable Holmatro pump technology significantly reduces oil heating.The intelligent electronic motor control and pressure monitoring ensure ultimate cutting performance.The specially manufactured battery with large, high-quality cells minimises wear thanks to the seamless connection to the pump.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.ERGONOMICMade from high quality aluminium, it combines lightness and durability.The compact inline design offers more freedom of movement when cuts need to be made in hard-to-reach places.The ergonomic 360° carrying handle increases operating comfort in various working positions. USER-FRIENDLY BATTERY MANAGEMENTReal-time feedback on charge status and temperature.Charging time: only 20 minutes to 80 %.Charging possible on the device.The battery platform is compatible with other upcoming Holmatro products. DEVICE INSIGHTS IN REAL TIMEConnect the battery-powered device to your tablet or smartphone via Bluetooth®.The intuitive Holmatro app provides real-time diagnostics with every use.Monitor battery and charge status, pump level, motor temperature, working pressure (including peak pressure) and speed mode.DATAOpening width: max. 182 mmmax. cutting diameter round material (S235 acc. to EN 10025-2): 30 mmMax. cutting diameter of pipe (E235 acc. to EN 10305-1), wall thickness 3 mm: 100 mmCatalysts: 100 %Number of cuts per day: 50Number of operating hours per day: 4Cutting force: max. 977 kNDimensions: 890x271x276 mmWeight incl. battery: 21.5 kgVoltage: 28 Volt VDCScope of delivery1x 101.003.239 - HBC400A30 - Battery-powered recycling shears2x 101.003.240 - PBPA288 - Rechargeable battery (28 VDC, 8 Ah, 202 Wh, Li-Ion)1x 101.003.242 - PBCH1 - Charger (EU)

The HMC050A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in the recycling sector or in production. HOLMATRO's mobile cutters for industrial applications have been specially developed for on-site use and are therefore ideal for various applications such as removing catalytic converters, demolition work and cutting cables. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in various working positions.Basic specificationsModel: HMC050A10Blade type: 10 cablesCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting capacitymax. cutting force: 441 kN / 45 t / 441 / 45 (kN/t)max. opening width: 120 mmDimensions, weight and temperatureWeight, ready for use: 11.4 kgDimensions (LxWxH): 706 x 254 x 240 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter of power cable: Ø 90 mmNumber of cuts per day: 100Number of operating hours per day: 8

The HMC050A30 cutter is suitable for a wide range of industrial cutting applications, e.g. vehicle recycling or dismantling, demolition work and metal/scrap recycling. HOLMATRO's mobile cutters for industrial applications have been specially developed for on-site use and are therefore ideal for various applications such as catalytic converter removal, demolition work and cable cutting. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in various working positions.Basic specificationsModel: HMC050A30Blade type: 30 StandardCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting powermax. cutting force: 438kN / 44.7tmax. opening width: 170 mmDimensions, weight and temperatureWeight, ready for use: 10.8 kgDimensions (LxWxH): 693 x 254 x 240 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter round material: Ø 22 mm (EN 10025-2)max. cutting diameter pipe: Ø 60x3 mm (E235 according to EN10305-1)Catalyzer: 90%Number of cuts per day: 100Number of operating hours per day: 8

The HMC100A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in the recycling sector or in production.HOLMATRO's mobile cutters for industrial applications have been specially developed for use on site and are therefore ideal for various applications such as removing catalytic converters, demolition work and cutting cables. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in various working positions.Basic specificationsModel: HMC100A10Blade type: 10 cablesCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting powermax. cutting force: 559 kN / 57 tonnesmax. opening width: 145 mmDimensions, weight and temperatureWeight, ready for use: 15.5 kgDimensions (LxWxH): 749 x 269 x 276 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter of power cable: Ø 110 mmNumber of cuts per day: 100Number of operating hours per day: 8

The HMC100A30 cutter is suitable for a wide range of industrial cutting applications, e.g. vehicle recycling or dismantling, demolition work and metal/scrap recycling.HOLMATRO's mobile cutters for industrial applications have been specially developed for on-site use and are therefore ideal for various applications such as catalytic converter removal, demolition work and cable cutting. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in different working positions.Basic specificationsModel: HMC100A30Blade type: 30 StandardCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting powermax. cutting force: 557kN / 56.8tmax. opening width: 170 mmDimensions, weight and temperatureWeight, ready for use: 14.4 kgDimensions (LxWxH): 712 x 269 x 276 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter round material: Ø 26 mm (EN 10025-2)max. cutting diameter tube: Ø 80x3 mm (E235 according to EN10305-1)Catalyzer: 95%Number of cuts per day: 100Number of operating hours per day: 8

The HMC400A10 cutter is equipped with special blades, including a blade guide, making it the ideal solution for cutting cables in the recycling sector or in production.HOLMATRO's mobile cutters for industrial applications have been specially developed for use on site and are therefore ideal for various applications such as removing catalytic converters, demolition work and cutting cables. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in different working positions.Basic specificationsModel: HMC400A10Blade type: 10 cablesCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting powermax. cutting force: 977 kN / 99.6 tonnesmax. opening width: 170 mmDimensions, weight and temperatureWeight, ready for use: 20.2 kgDimensions (LxWxH): 838 x 267 x 277 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter of power cable: Ø 140 mmNumber of cuts per day: 100Number of operating hours per day: 8

The HMC400A30 cutter is suitable for a wide range of industrial cutting applications, e.g. vehicle recycling or dismantling, demolition work and metal/scrap recycling.HOLMATRO's mobile cutters for industrial applications have been specially developed for on-site use and are therefore ideal for various applications such as catalytic converter removal, demolition work and cable cutting. Mobility is at the centre of these models, allowing the operator to carry out cutting tasks efficiently in different environments.FeaturesSAFEControlled cutting with minimised vibration and noise to eliminate the risk of sparking.The devices can be operated with both hands for greater safety during cutting operations.The deadman function stops any operation immediately when the hands release the appliance.Protected moving parts to further minimise the risk of accidents.DURABLE AND RELIABLEMade of high-quality aluminium and without compromising on durability.The flat, central I-bolt design minimises blade separation, improves cutting performance and facilitates access to confined spaces.Central I-bolt and hinge pins with grease nipples for easy maintenance.Proven double hose technology, couplings with locking ring.ERGONOMIC:Made from high quality aluminium, it combines lightness and durability.The ultimate balance between cutting power and weight: performance without compromise.With its improved ergonomic design, the new control handle offers a better grip for optimum tool control.The ergonomic 360° carrying handle increases operating comfort in various working positions.Basic specificationsModel: HMC400A30Blade type: 30 StandardCutter type: MobileMax. operating pressure: 500 / 50 (bar/Mpa)Cutting powermax. cutting force: 977kN / 99.6tmax. opening width: 182 mmDimensions, weight and temperatureWeight, ready for use: 17 kgDimensions (LxWxH): 772 x 267 x 277 mmTemperature range: -20 +55 °CCutting capacityMax. cutting diameter round material: Ø 30 mm (EN 10025-2)max. cutting diameter tube: Ø 100x3 mm (E235 according to EN10305-1)Catalyzer: 100%Number of cuts per day: 100Number of operating hours per day: 8

Industrial stationary cutters from HOLMATRO have been specially developed for continuous use in industrial processes where repetitive tasks are carried out at a fixed point on the production line, for example. With this model, durability takes centre stage. This makes it suitable for applications with high load frequency and offers ergonomics to fulfil longer physical requirements. is equipped with blades that combine a cutting and spreading function. This makes it ideal for recycling household appliances such as refrigerators and heat pumps. Made entirely of stainless steel, the stationary cutter ensures robustness and reliability in the stationary design. To counteract the increase in weight compared to portable aluminium models, a balancing device is integrated. This ensures ease of use and operator comfort. With a strong commitment to safety, durability and ergonomics, Holmatro's industrial cutting machines are characterised by their reliability and performance. They fulfil the diverse cutting requirements of heavy-duty industrial applications while ensuring user comfort and safety.FeaturesSAFEThe devices can be operated with both hands, which increases safety during cutting work.Deadman function to stop the operation immediately when hands are releasedProtected moving parts to further minimise the risk of accidentsDURABLESolid bladesHousing and piston rod made of high-quality steel for a long service lifeBlade lubrication grooves for smooth and efficient cutting processesCentre bolt with grease nippleReplaceable blades for versatile useHigh-quality, anodised aluminium housingHigh-quality steel piston rod for a long service lifeBlade lubrication grooves for smooth and efficient cutting processesCentre bolt with grease nippleReplaceable blades for versatile useERGONOMICEasy to operateControl at the touch of a button.Stays on torque thanks to permanent locking of the centre boltThe rotation mechanism allows the device to be turned in any direction and at any angle.The device weighs almost nothing thanks to the use of the levelling device.Model: ICU 20 S 40Blade type: 40 straightCutter type: stationaryMax. operating pressure: 500 / 50 (bar/Mpa)Cutting capacitymax. spreading force: 92 kN / 9.4 tmax. spreading opening: 305 mmmax. cutting force: 264 kN / 26.9 tmax. opening width: 296 mmDimensions, weight and temperatureWeight, ready for use: 26.6 kgTemperature range: -20 +80 °CCutting capacityNumber of cuts per day: 200Number of operating hours per day: 24

Industrial stationary cutters from HOLMATRO have been specially developed for continuous use in industrial processes where repetitive tasks are carried out at a fixed point on the production line, for example.With this model, durability takes centre stage. This makes it suitable for applications with high load frequency and offers ergonomics to fulfil longer physical requirements. is equipped with blades that combine a cutting and spreading function. This makes it ideal for recycling household appliances such as refrigerators and heat pumps. Made entirely of stainless steel, the stationary cutter ensures robustness and reliability in the stationary design. To counteract the increase in weight compared to portable aluminium models, a balancing device is integrated. This ensures ease of use and operator comfort. With a strong commitment to safety, durability and ergonomics, Holmatro's industrial cutting machines are characterised by their reliability and performance. They fulfil the diverse cutting requirements of heavy-duty industrial applications while ensuring user comfort and safety.FeaturesSAFEThe devices can be operated with both hands, which increases safety during cutting work.Deadman function to stop the operation immediately when hands are releasedProtected moving parts to further minimise the risk of accidentsDURABLESolid bladesHousing and piston rod made of high-quality steel for a long service lifeBlade lubrication grooves for smooth and efficient cutting processesCentre bolt with grease nippleReplaceable blades for versatile useHigh-quality, anodised aluminium housingHigh-quality steel piston rod for a long service lifeBlade lubrication grooves for smooth and efficient cutting processesCentre bolt with grease nippleReplaceable blades for versatile useERGONOMICEasy to operateControl at the touch of a button.Stays on torque thanks to permanent locking of the centre boltThe rotation mechanism allows the device to be turned in any direction and at any angle.The device weighs almost nothing thanks to the use of the levelling device.Model: ICU 20 STH 40 (90° rotated)Blade type: 40 straightCutter type: stationaryMax. operating pressure: 500 / 50 (bar/Mpa)Cutting capacitymax. spreading force: 92 kN / 9.4 tmax. spreading opening: 305 mmmax. cutting force: 264 kN / 26.9 tmax. opening width: 296 mmDimensions, weight and temperatureWeight, ready for use: 26.6 kgTemperature range: -20 +80 °CCutting capacityNumber of cuts per day: 200Number of operating hours per day: 24

Holmatro's mobile industrial cutters have been specially developed for use "in the field". The main focus of these models is on mobility, which enables the operator to carry out cutting tasks efficiently in different environments. With the cordless mini cutter, we offer you an ideal, ready-to-use tool for repetitive cutting of small metals (cutting rebar, fences, steel bars, dismantling car parts, etc.) or for carrying out cutting tasks in places with very limited room for manoeuvre and insertion space.SAFE Start-stop mode; press the control button to activate, release the control button immediately to save valuable battery time.Variable speed control; press lightly on the control button for low speed, press further down to increase speed.Control slider; easily switch between opening and closingEasy grip teeth on both blades. DURABLEPart of the Cordless Alliance System (CAS); battery compatible with other CAS tools Solid bladesHigh-quality, anodised aluminium housingStainless steel piston Suitable for all weather conditions. DATAOpening width: max. 59 mmRound material up to Ø20 mmFlat material up to 60x5 mmRound tube up to 33.7x2.6 mmCutting force: max. 220 kNDimensions: 554x92x154 mmWeight incl. battery: 4.9 kgVoltage: 18 Volt VDCERGONOMICCompact and lightweightOne-handed operationEqually suitable for left and right-handed usersUnique, angled cutting jaw; freedom in positioning the toolIntegrated LED lighting; well-lit work area in confined, dark spacesBattery charge level indicatorMaximum freedom of use; ideal for confined spacesRetains torque thanks to permanent locking of the centre bolt.Scope of delivery101.003.081 - ICCU 10 - Mini cutter101.003.082 - CAS CBPA182 - Rechargeable battery101.003.083 - CBCH1 - Charger